|
| |
Combloc Supplies
Software
|
|
| |
The Horus Vision
Digital Aiming System"Horus Vision
Software unleashes the power of your scope"!
Introducing the ATRAG 1P and
ATRAG 2P!
Plus Palm
M500 PDA
|
|
Horus TRAG software is applicable for any scope,
any rifle, and any ammunition in all conditions,
at an elevation and will get you on target no
matter the range with "ONE SHOT
CONFIDENCE"!
As Horus Vision
will tell you:
"Any Shooter using
Horus Vision Digital Aiming Systems owns the
moment for first shot confidence"
|
|
"ATRAG1P"
FEATURES:
When you first run ATRAG1P, the first
screen you will see is the START UP
screen. You will notice that sample data
has been included for all of the
parameters that affect the accuracy of
your shot.
Note the small down arrow
(or triangle) next to the
"Quit" button. By tapping on it
you will be informed of the options for
viewing your aiming solutions. TMOA (True
Minute of Angle), HORUS (Aiming Point on
the Horus Reticle) and CLICKS (for all
conventional scopes).
Click on
any of the images below to enlarge
|
|
|
CONVENTIONAL
(Clicking) Scopes:
Set up for the number of clicks for your
scope:
Your Leupold, Burris, Zeiss, Schmidt and
Bender, Swarovski, Nikon, Bausch &
Lomb, Bushnell etc. scopes will serve you
better with the Horus ATRAG1P System.
When you select "Clicks" you
are given the option of selecting how
many Clicks your scope needs to adjust
for one true minute of angle. Your scope
manual will indicate what this number is.
Horus allows for a maximum of 8 clicks
per TMOA. Just tap on the number next to
Clicks to select the number needed for
your scope and then tap on done.Click on
any of the image below to enlarge
|
|
|
THREE
MAJOR SEGMENTS OF DATA:
There are three major segments of of data
that determine an accurate solution:
- Data
regarding your rifle and
ammunition.
- Atmospheric
Conditions
- Target
Click on
any of the image below to enlarge
|
|
|
DATA
REGARDING YOUR RIFLE AND AMMUNITION:
by tapping on the GUN section on your
screen will reveal data entry fields. By
tapping on the appropriate number field
on the bottom of the screen the
highlighted area will be modified. Once
modified, tap on "Next" and the
next area will be highlighted. After you
have answered all of the questions tap
"Done"to return to the main
screen.The five segments of
information are:
- Bore
Height - the distance from the
centre of your bore and the
centre of your objective lense.
- Bullet
Weight (grains).
- C1
Co-efficient-the decimal number
provided by your ammunition
manufacture which indicates
"drag".
- Muzzle
Velocity (the result of your test
firing your ammunition in your
rifle).
- Zero
Range (the precise number of
yards or meters at which you
zeroed your rifle with this
ammunition.
Click on
any of the image below to enlarge
|
|
|
ATMOSPHERIC
CONDITIONS:
There are two choices for data entry in
this area. AT and TBH.Tapping on AT wil
reveal data segments for Altitude and
Temperature. For most shots out to 500
yards (or metres) this is suffient data.
Tapping on
TBH wil reveal data segments for
Temperature, Barometric Pressure and
Relative Humidity. It is recommended for
shots in excess of 500 yards (or meters)
that this option be used so as to be more
precise.
Click on
any of the image below to enlarge
|
|
|
TARGET:
When you have a target in sight, the
critical data about wind,
uphill/downhill, distance and target
speed is necessary.
Tapping on the Target will
reveal data screens for these elements.
As before, data is inserted by use of the
number table at the bottom of the screen
for the data field highlighted. When
finished with one field, tapping on the
NEXT will highlight the next screen.
Tapping DONE will return you to HOME
screen. Note that if one data element
changes, it is not necessary to re-enter
all of the other data elements. Simply
tap on the field that needs changing,
insert the new data and then press DONE.
Click on
any of the image below to enlarge
|
|
|
"COME
UPS"
Once target data is entered, when in the
Clicks mode, the bottom of the screen
will give you the exact number of
elevation and windage clicks necessary to
adjust your scope from ZERO to range of
target.
Click
on any of the image below to enlarge
|
|
|
NEW
TARGET:
Observance of a new target simply
necessitates entering the new target
range on the TARGET screen. When this is
done and the DONE button is tapped, the
Home screen will note the exact number of
clicks in both windage and elevation
necessary to go from the first target to
the second target. Simply adjust your
scope for the indicated number of clicks
(up or down, left or right) to set your
scope to the new targets range. You need
not record your zero or the number of
clicks input on your scope as ATRAG
remembers where you were. To go back to
ZERO, simply enter your ZERO range and
ATRAG will note the necessary adjustments
to set your scope on your primary ZERO.Click on
any of the image below to enlarge
|
|
|
DATA
SAFETY:
Because ATRAG is fully contained on a
data chip, all data is preserved so loss
of battery power for example, will not
destroy your historical data. Your data
is permanently "burned"into
this chip and once you replace your
batteries, simply re-insert the chip into
your PDA and ATRAG will reappear
Unhampered.
Click
on any of the image below to enlarge
|
|
|
ATRAG
2P ADDITIONAL FEATURES:
In addition to the features noted above
for ATRAG1P, ATRAG2P offers the following
enhancements. |
|
|
RANGE
CARD:
When you have adjusted your data for your
first target (up from primary zero) by
tapping on the upper left hand corner of
your Home screen noted as "RANGE
CARD" ATRAG will show you all of the
adjustments from your primary ZERO to any
range out to the maximum range you have
entered in the "Setup" screen
for the Range Card. You can copy this
data to a Range Card and paste on butt of
your rifle for quick reference.
Click
on any of the image below to enlarge
|
|
|
RANGE
CARD SET UP:
When you tap on the RANGE CARD tab, you
will be given a choice between SET UP and
MAIN. By tapping on SET UP, you will be
given three fields to enter your choices
into:Start Range (your Primary
ZERO)
End Range (Maximum range of your rifle)
Increment (number of yards or meters
between each increment you wish to see on
your range card)
Click on
any of the image below to enlarge
|
|
|
MIL
DOT RANGE FINDER:
For a shooter experienced with the
U.S.M.C Mil Dots, Horus provides a Mil
Dot Range Finder screen, which allows you
to use HORUS to various Targets using
this techinque.
Click
on any of the image below to enlarge
|
|
|
HEAT
VERSUS MUZZEL VELOCITY:
ATRAG2P adds a table that
automatically adjusts your
bullets velocity to allow for
increases in ambient temperature.
Ammunition performs differently
at different temperatures and
this table allows you to
automatically adjust for this
factor without having to enter
any additional information. It is
necessary for you to chronograph
your loads at various
temperatures.
Click on
any of the image below to enlarge
|
|
|
Introducing
the Palm M500 PDA
PALM
M500 PDA:
The Palm M500 is the ultimate PDA
to use inconjuction with the
Atrag 1 and 2 Aiming systems.
This PDA is used by a major
percentage of all users who
utilize the ATRAG 1 and 2 Aiming
Software.
Click on
any of the image below to enlarge
|
|
|
|
Order Information:
Please Note:
The Order Form will open in a new Window
ATRAG 1P Price: $200.00
GST Inc
Click Here to
go to the order form for the ATRAG
1P
ATRAG 2P Price: $375.00
GST Inc
Click Here to
order the ATRAG 2P
Palm M500 PDA Price:
$375.00 GST Inc
Click Here to
order the Palm
M500 PDA
Standard Shipping Price: $10 NZ wide for
all products under 5KG.
Rifles and Shotgun
Shipping Prices: $25
North Island/$40 South Island
Once
your order arrives, Chris will then contact you
and answer any questions that you have. He will
also discuss Shipping and Payment details with
you. If you have any questions before ordering
please contact Chris at:
Cellphone:
021-368-548
or
you can fax or email him at:
mailto:chris@comblocs.com
Fax: 64
(06) 278 5082
Please
Note: All Rifle and
Ammunition Orders must have a copy of your
Firearms Licence Attached!
Ordering Requirements:
Under New Zealand Firearms laws you
are required to fill out and have a Police
Officer sign your orderform, before you can
purchase any of the Firearms and Ammuntion
offered for sale by Combloc Supplies. For more
information please see my Generic
Orderform. Click
Here
|
|
|
